GRINDING CURTAINS

CEPRO offers a large range of grinding curtains in various standard

sizes or these can be custom-made according to the client’s

specifications

Unless otherwise stated, all CEPRO grinding curtains are:

• made from approx. 0.40mm thick PVC

• produced with a 5cm sealed seam on all four sides

• supplied with heavy plastic suspension eyelets embedded in the

upper seam

• supplied with snap-fasteners on two sides, spaced at 40cm above

one another to enable the user to connect the curtains to each

other

• comes with a set of steel hooks (diameter 30mm)

• packed in a plastic bag including full information regarding the

product.

Available colours

? CEPRO CLEAR

CEPRO Clear curtains are not designed for shielding professional

welding workspaces. CEPRO Clear curtains are suitable for use as a

grinding separation. CEPRO Clear curtains are flame retardant but do

not comply with the EN 1598 standards because they are not meant for

welding purposes.

Technical information

• Minimum usage temperature approx. 5°C.

• Maximum heat resistance approx. 80°C.

• The grinding curtains are for visual protection use and although

they are flame retardant, they are not suitable for use as a welding

blanket and/or as protection against welding sparks.

• The material is not intended to replace a welding window but to be

used to protect bystanders from harmful rays in the grinding area

Custom-made curtains

The specifications for custom-made curtains are as follows:

• PVC suspension eyelets every 20cm

• 5cm seam all-around

• Snap-fasteners on both vertical sides, upon request

• Minimum size supplied is 1m²

• Minimum length supplied per side is 100cm

• Due to the elasticity of the PVC material, 5cm tolerance should be

taken into account on the measurements provided

• The maximum size per curtain is approx. 25m² (connectable for

larger areas)

• custom-made curtains are not returnable